论文编号:CK087论文字数:27507,页数:46
摘要
工业锅炉是工业生产的动力，它广泛用于化工、纺织、造纸、电力等行业。我国现有工业锅炉约25万台，年耗煤约占煤炭总产量的1／3。这些工业锅炉的管理、运行和自动化水平还比较低，具有很严重的浪费能源现象。所以，目前面临的一个重要的问题，就改善工业锅炉的控制系统，从而提高效率。
本文研究了组态软件在实际工程项目中应用。在工业测控系统中，设备大型化、自动化、高速化和复杂化程度提高，系统的设计开发、故障诊断、系统升级和功能完善也变得日益复杂。作为测控系统核心部分的监控软件，功能要求更加全面和复杂，可扩展性和扩展的费效比都是企业在监控系统的建立和更新时重点考虑的问题。原有的仅凭系统设计人员由底层开发的系统控制软件的日常维护、功能改善和更新也变得越来越困难。运用组态软件来实现系统的监控任务己成为工业发展中的必然趋势。
基于本工程课题的需要，对“热水锅炉测控系统”进行了设计和装调，包括系统的硬件结构、PLC控制以及组态监控的设计与研究。本文重点使用组态王软件完成包括工程流程图的制作、实时数据库的设计、报表输出，报警提示，用户登入，控制方式选择等在内的整个系统软件的开发工作，经工程调试，该设计方案符合工程要求，运行状况良好。
关键词: 组态软件；实时数据库；组态设计；测控系统
ABSTRACT
The paper studies practical applicatiaon of configuration software.In industrial measurement and control system, the equipment is becoming large, automatic, high-speed and complex.The design,fault diagnosis, update and inprovement of system are becoming more sophisticated. Monitor software is the kernal part of measurement and control system, its function is more overall and complex. The augmentability and cost-effectiveness ratio are emphasized when disigningand upgrading monitored control system. The old control software which are developed from bottom layer is becoming diffcult in maintenance,inproving and replacement. It is inevitable to use configuration software to accomplish system monitorand control. But current configuration sofeware is not perfect in system structure and methods of data exchange with other has theoretical significance and vital use value.
Papers studies the key technology on the configuration software component, real-time database, communications technology, control technology, and other key technologies have been studied. Discussed the real-time database architecture and design, configuration software to the PLC and specific methods of communication, data exchange software to enhance the capacity, improve software flexibility and maneuverability is of positive significance.
Based on the needs of this project subject to the "Hot Water Boiler Control System " for the design and alignment, including the hardware structure, PLC control and monitor the configuration of the design and research. This article focused on the use of MCGS configuration software, including completion of the production flow chart works, real-time database design, reporting output, the police suggested that users log in and control methods, such as the choice of the whole system software development, debugging the project, the design Compliance with the requirements of the programme, running in good condition.
Keywords: Configuration software: Real-time data base; Configuration design ;Control System
目 录
摘要 II
1 绪论 1
1.1 引言 1
1.2 组态软件概况 2
1.3 组态软件发展状况 5
1.4 组态软件未来趋势 7
2 组态软件关键技术 11
2.1 组态软件构成 ...
2.2 组态软件技术研究 ...13
2.3小结 .20
3 热水锅炉测控系统设计 21
3.1 锅炉及其工作原理 21
3.2 锅炉燃烧过程控制系统 21
3.3 组态软件选择 21
4 组态软件在系统中的应用 27
4.1 概述 27
4.2 硬件环境 27
4.3 软件组成 29
4.4 软件开发系统 32
4.5 变量定义与管理 33
4.6 I/O设备管理 35
4.7趋势曲线 37
4.8 报警和事件 40
5 结论 41
致谢 42参考文献 43
基于组态软件的测控系统设计......