论文编号:YS022论文字数:15007.页数:25
摘要：本论文阐述了喷墨打印技术现状及发展趋势，分析了喷墨墨水和喷墨打印纸这两种喷墨介质，并逐步分析了喷墨墨水、喷墨打印纸介质的组成和特点。本论文以喷墨介质性能为基础，通过纸张适性实验，对喷墨打印介质与打印质量的关系进行研究。研究结果表明：性能优良的打印介质, 能完整地完成油墨转移, 使图文清晰、饱满地再现于纸张上, 从而获得令人满意的颜色再现效果。纸张的平滑度、光泽度、白度和不透明度不同，对打印质量的影响也不同。
关键词：喷墨打印；平滑度；白度；光泽度；不透明度。
Abstract: In this paper, ink-jet printing technology on the status quo and development trends, analysis of the ink-jet ink and ink-jet ink-jet printing paper of these two media, and progressive analysis of ink-jet ink, ink-jet printing the composition and characteristics of the previous. In this paper, a performance-based inkjet media, right through the paper experiments on the ink-jet printing and print media to study the relationship between the quality. The results show that: the performance of the fine print media, to the full completion of the transfer of ink to make clear facsimile, reproduced in full paper to obtain a satisfactory effect of color reproduction. Paper smoothness, gloss, whiteness and opacity different from the impact of print quality are also different.
Keywords: ink-jet printing; smoothness; whiteness; gloss; opacity.
目 录
中文摘要I
英文摘要II
目 录III
1 绪论1
1.1 引言1
1.2 喷墨打印的发展现状和优缺点1
1.3 研究的目的和意义2
2 喷墨介质3
2.1 喷墨墨水介质4
2.2 喷墨打印纸5
3 喷墨墨水性能与打印质量影响研究8
4 喷墨打印介质性能测定10
4.1 实验条件10
4.2 喷墨打印介质性能测定10
4.3 喷墨打印介质与打印质量影响研究14
5 总结19
致谢21
参考文献22
喷墨介质性能研究......